# SCIP

Solving Constraint Integer Programs

The n-Queens Problem

We show how to use SCIP as a backend for solving mixed integer programs by developing a solver for the $$n$$-queens problem. We first give a brief introduction into the problem and then describe a C++ program for solving it. The model is based on the one described in the Zimpl documentation.

# The n-queens problem

The $$n$$-queens problem asks how to place $$n$$ queens on an $$n \times n$$ chess board in a way that no two queens interfere. In detail this means:

• In each vertical line of the board only one queen is allowed, we will refer to these lines as columns.
• In each horizontal line of the board only one queen is allowed, these lines will be called rows later on.
• In each diagonal line only one queen is allowed.

This can be modeled as a binary program in the following way: Let $$x_{i,j} \in \{0,1\}$$ denote whether a queen is placed on the $$i$$th row and the $$j$$th column of the chess board. Since the problem is to find a placement, the objective function is irrelevant. We add, however, the redundant objective to maximize the number of placed queens:

$\max \sum_{i=1}^n \sum_{j=1}^n x_{i,j}$

Now we force exactly one queen to be placed in every column and every row:

\begin{aligned} \sum_{i=1}^n x_{i,j} & = & 1, \ j=1,\ldots,n \\ \sum_{j=1}^n x_{i,j} & = & 1, \ i=1,\ldots,n\end{aligned}

The diagonal rows are a little bit more complicated to write up:

\begin{aligned} \sum_{i=1}^{n-j+1} x_{i,j+i-1} & \leq & 1, \ j = 1, \ldots, n \\ \sum_{j=1}^{n-i+1} x_{i+j-1,j} & \leq & 1, \ i = 1, \ldots, n \\ \sum_{i=1}^{n-j+1} x_{i,n-j-i+2} & \leq & 1, \ j = 1, \ldots, n\\ \sum_{j=1}^{n-i+1} x_{i+j-1,n-j+1} & \leq & 1, \ i = 1, \ldots, n\\\end{aligned}

# Error handling in SCIP

Before we transform the $$n$$-queens IP program into a SCIP program, we first consider a general point when working with SCIP functions: Most SCIP functions return a value of the type SCIP_RETCODE. If this is equal to SCIP_OKAY, then everything went well, otherwise it indicates an error code. Therefore the normal call of a SCIP function returning a SCIP_RETCODE (we use SCIPfunction as a generic name – replace it with whatever function you are calling) is

SCIP_RETCODE retcode;
retcode = SCIPfunction();
if (retcode != SCIP_OKAY)
{
// do your error handling here
}


Since this is a lot of code for every function call, SCIP provides two macros namely SCIP_CALL and SCIP_CALL_ABORT. The second one just aborts the execution by calling abort() if an error occured. The first one calls the SCIP function and, in the error case, returns the retcode. This results in the following code:

SCIP_RETCODE myfunction(void)
{
SCIP_CALL(SCIPfunction());
SCIP_CALL(SCIPotherfunction());

return SCIP_OKAY;
}
int main(int args, char * argv)
{
SCIP_RETCODE retcode = myfunction();
if (retcode != SCIP_OKAY)
{
// do your error handling here
}
}


While this is nice for C programs, there is a problem when using SCIP_CALL from C++: A C++ constructor is not allowed to return a value. The same is true for destructors. Therefore we supply a third method, the SCIP_CALL_EXC macro. This behaves just like SCIP_CALL, but instead of returning the error code it throws an exception of a new type SCIPException. So the example above would now be written as:

int main(int args, char * argv)
{
try
{
SCIP_CALL_EXC(SCIPfunction());
SCIP_CALL_EXC(SCIPotherfunction());
} catch(SCIPException & exec)
{
cerr<<exec.what()<<endl;
exit(exec.getRetcode());
}
}


# Include files

For a SCIP based project there are three main header files to consider. The first and most important one is of course scip/scip.h. It declares the SCIP pointer and all public functions. You may have noticed that SCIP can be extended by plugins. In fact most parts of the MIP solver like heuristics, separators, etc. are implemented as plugins. To use them, include scip/scipdefplugins.h.

These two header files are C type. In early versions of SCIP it was necessary to wrap them in an extern "C" statement. As of version 1.1 SCIP now detects a C++ compiler and adds extern "C" own its own.

The last header file to consider is objscip/objscip.h if you want to use the C++ wrapper classes distributed with SCIP. For the queens example we do not develop own plugins, so we just use

#include <scip/scip.h>
#include <scip/scipdefplugins.h>


# Developing a queens solver

When you use SCIP you have to do the following steps:

• initialize the SCIP environment
• create a problem
• add variables and constraints to the problem
• solve the problem
• access results
• free the SCIP environment

You can, of course, cycle through some of these steps like accessing the results, modifying the problem and solving again. We will now describe these steps in more detail for the queens solver.

### Initializing the SCIP environment

In this section, we start developing our queens solver. Before you can do anything with SCIP, you have to create a valid SCIP pointer. For this purpose use the SCIPcreate() function:

SCIP* scip;
SCIP_CALL_EXC(SCIPcreate(& scip));


After we created our SCIP pointer we load the plugins. In SCIP nearly everything is a plugin: heuristics, separators, constraint handlers, etc. Whenever you want to use one you first have to include it. This is done by various SCIPinclude functions like SCIPincludeHeur() for heuristics or SCIPincludeConshdlr() for constraint handlers. This also activates the default display plugins which writes various messages to standard output. (If you do not like this you can disable it by a call of SCIPmessagehdlrSetQuiet(SCIPgetMessagehdlr(scip), TRUE).) All together we get:

SCIP_CALL_EXC(SCIPincludeDefaultPlugins(scip));
// SCIPmessagehdlrSetQuiet(SCIPgetMessagehdlr(scip), TRUE);
// uncomment the above line to disable output


### Creating a problem

Now we can create the IP model for the queens solver in SCIP. First we create an empty problem with SCIPcreateProb(). The first argument is our SCIP pointer and the second is the name of the problem. You can also supply user specific problem data and call back functions to handle them, but normally you will not need them and can safely set them to NULL:

SCIP_CALL_EXC(SCIPcreateProb(scip, "queens", NULL, NULL,
NULL, NULL, NULL, NULL, NULL));


The default objective sense for SCIP problems is minimizing. Since we have a maximization problem we have to change this:

SCIP_CALL_EXC(SCIPsetObjsense(scip, SCIP_OBJSENSE_MAXIMIZE));


### Creating variables

Now it is time to fill the empty problem with information. We start by creating variables, one binary variable for every field on the chess board. Variables are accessed through the type SCIP_VAR*. Associated with each variable is a type (continuous, integer, or binary), lower and upper bound and an objective coefficient. In our case, the type is binary for all variables, the lower bound is naturally 0, the upper bound 1, and the objective is 1 for all variables:

SCIP_VAR* var;
SCIP_CALL_EXC(SCIPcreateVar(scip, & var, "x#i#j", 0.0, 1.0, 1.0,
SCIP_VARTYPE_BINARY, TRUE, FALSE,
NULL, NULL, NULL, NULL, NULL));


Here, you should replace $$i$$ and $$j$$ by the actual row and column number of the variable. The fourth argument is the lower bound, the fifth the upper bound, the sixth the objective, and the seventh the type. After that you specify two boolean parameters indicating whether this variable is in the initial (root) LP and whether it is allowed to be removed during aging. Like in SCIPcreateProb() you can use the last five parameters to specify user data. We set these parameters to NULL. After creating the SCIP_VAR pointer it is time to add it to the SCIP problem:

SCIP_CALL_EXC(SCIPaddVar(scip, var));


You should store the SCIP_VAR pointers somewhere, since you will need them to add the variables to constraints and to access their values in the final solution and so on. In our example, you can use a two dimensional STL vector for that purpose.

### Creating constraints

Creating and adding variables is just half of the battle. To ensure feasibility, we have to add the constraints we described above. To create a constraint in SCIP you first need to specify a constraint handler. The constraint handler is responsible for checking feasibility, tighten variable bounds, adding new rows to the underlying LP problem and so on. The creating method depends on the actual constraint you want to use and is usually called SCIPcreateConsName – for instance SCIPcreateConsLinear(). Although there are many different default constraints like knapsack, logic-OR, etc. (for a complete list, see Constraint Handlers), it is a safe way to create them as linear constraints. The presolver will automatically transform them to the right constraint type. We will therefore add all our constraints as type linear and describe the handler here.

The linear constraint handler handles constraint of the following type:

$lhs \leq a^T x \leq rhs$

There are three special cases of these: For equality constraints set $$lhs = rhs$$, for lesser equal constraints, set $$lhs = -$$SCIPinfinity(scip) and for greater equal constraints $$rhs =$$ SCIPinfinity(scip). So the creating of the diagonal constraints looks as follows:

SCIP_CONS* cons;
SCIP_CALL_EXC(SCIPcreateConsLinear(scip, & cons, "diag",
0, NULL, NULL, 0, 1.0, TRUE,
TRUE, TRUE, TRUE, TRUE, FALSE,
FALSE, FALSE, FALSE, FALSE));


The first is, as usual, the SCIP pointer and the second the SCIP_CONS pointer, which allows to access the constraint later. After that you can specify variables to be added to the constraint. This could be done by specifying the number, an array of SCIP_VAR pointers to variables, and an array of values of the coefficients, stored as doubles. We skip the adding at this point and use the function SCIPaddCoefLinear() described later on. The next two entries are $$lhs$$ and $$rhs$$. In our cases 0 and 1. Then you specify the following parameters:

parameter description
initial set this to TRUE if you want the constraint to occur in the root problem
separate set this to TRUE if you would like the handler to separate, e.g. generate cuts
enforce set this to TRUE if you would like the handler to enforce solutions. This means that when the handler declares an LP or pseudo solution as infeasible, it can resolve infeasibility by adding cuts, reducing the domain of a variable, performing a branching, etc.
check set this to TRUE if the constraint handler should check solutions
propagate set this to TRUE if you want to propagate solutions, this means tighten variables domains based on constraint information
local set this to TRUE if the constraint is only locally valid, e.g., generated in a branch and bound node
modifiable set this to TRUE if the constraint may be modified during solution process, e.g. new variables may be added (colum generation)
dynamic set this to TRUE if this constraint is subject to aging, this means it will be removed after being inactive for a while (you should also say TRUE to removable in that case) removable set this to TRUE to allow the deletion of the relaxation of the constraint from the LP
stickingatnode set this to TRUE if you want the constraint to be kept at the node it was added

Variables which are not added at the creation time of the constraint can be added by calling:

SCIP_CALL_EXC(SCIPaddCoefLinear(scip, cons, var, 1.0));


Here “1.0” is the matrix coefficient.

### Solving the problem

When the problem is setup completely we can solve it. This is done by

SCIP_CALL_EXC(SCIPsolve(scip));


SCIP then starts transforming and preprocessing the problem. After that it enters the solving stage where the root LP is solved, heuristics are run, cuts are generated, and the branching process starts. All plugins you wrote (heuristics, separators, etc.) will be called by SCIP through callback functions at this stage.

### Accessing results

Now that the problem is solved, we want to know the solution data. Whether the problem has been solved to optimality, only feasible solutions were found, and so on, can be queried by SCIPgetStatus(). We ignore this in our queens solver and start with the best solution found so far. This can be accessed by

SCIP_SOL* sol = SCIPgetBestSol(scip);


If SCIP did not find a solution sol is equal to 0. Otherwise, you can get the objective value by SCIPgetSolOrigObj(). In the queens example we want to know whether a queen is placed on a field or not. Therefore we need the value of the variable $$x_{i,j}$$ which can be accessed by SCIPgetSolVal(). In the case of an integer or binary variable, care must be taken, because this functions returns double values. So if we want to query a binary variable we use the following:

if (sol == NULL)
{
// output error message here and abort
}
if ( SCIPgetSolVal(scip, sol, var) > 0.5 )
{
// value is one
}
else
{
// value is zero
}


In this example, we of course use the knowledge that variables have 0/1 values only. There are special SCIP functions for performing numerical comparisons between values that are not known to be integer. For instance, you can use SCIPisFeasEQ(scip, x, y) for comparing whether $$x$$ is equal to $$y$$ within the feasibility tolerance of SCIP. This macro return TRUE if $$|x - y| < \epsilon$$, where $$\epsilon$$ is the feasibility tolerance of SCIP (by default $$\epsilon = 10^{-6}$$).

### Freeing the SCIP environment

Finally, we must free all the memory SCIP used. When we created the variables and constraints, the SCIPcreateVar() and SCIPcreateCons() captured the corresponding variables and constraints. This means that SCIP knows that we have a pointer to these and will only free the memory if we tell it that we do not need these pointers anymore. This is done by the SCIPrelease functions. So before we can free the SCIP pointer, we have to call:

SCIP_CALL_EXC(SCIPreleaseVar(scip, & var));
SCIP_CALL_EXC(SCIPreleaseCons(scip, & cons));


Then we close the SCIP environment:

SCIP_CALL_EXC(SCIPfree(& scip));


# Installation

See the Install file